Amiko Multitracker 3 DVB-S/S2/DVB-T/T2/DVB-C/C2

Amiko Multitracker 3 DVB-S / S2 / DVB-T / T2 / DVB-C / C2

Amiko Multitracker 3 DVB-S2T2C meter, new model from Amiko.

5-inch (12.7 CM) AMOLED color display.

Compatible with DVB-S / S2 / DVB-T / T2 / DVB-C / C2

TS Demux: Standard followed by ISO / IEC 13818-1

Video decoding: MPEG4, MPEG4-AVC / H.264 and H.265 / HEVC High Tier @ Level4.1, MPEG2 ISO / IEC 13818-2 MP @ HL / ML

Audio decoding: MPEG1, MPEG2 ISO / IEC 13818-3 LAYER I&II.

LNB protection and short circuit indicator.

Extremely fast and accurate with high sensitivity.

Database easily editable by the user.

Audible notification of signal blocking.

USB connection for firmware update, data logging and screen capture.

The database can be edited on the PC and downloaded via the USB port.

Power supply 100-240 V / 50/60 Hz 12 V, 2000 mA.

Ultra-long standby, low power consumption.

7.4 V / 5000 mA lithium-ion battery with quick charge

High quality housing made of aluminum

 Satellite

DVB-S / S2

Power LEVEL, CBER, VBER (DVBS), LBER (DVBS2) and CNR display.

Real-time spectrum analyzer and transponder message detected

Constellation diagram

Calculation of azimuth and elevation angle.

Azimuth and elevation measurement.

Power, dBm, CNR, BER, modulation mode display.

DisEqC1.0, DisEqC1.1, DisEqC1.2, USALS, SCD and SCR2 supported.

DiSEqC automatic identification for D isEqC1.0.

Cable identification on the Quattro LNB easily

Automatic satellite identification.

LNB current and voltage monitor

Terrestrial

DVB-T / T2

PowerSpectrum analyzer

constellation

Signal identification: DVB-T / T2 Automatic

Scope display for multichannels

Cable

DVB-C / C2

Power LEVEL, CBER, PER (DVBC), LBER (DVBC2) and MER display.

Tilt Display

Spectrum analyzer

constellation

Inclined screen for three channels

Power

Power supply: 100-240V (50 / 60Hz) AC in / 12V / 2000mA out

Fast loading