Smart false alarm filter

MotionCam Outdoor is equipped with two independent PIR sensors whose signals are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interference.

Correlation analysis

Whenever MotionСamOutdoor detects movement, LISA analyzes and compares the signal shapes from two sensors in real time. If the forms are similar, the alarm is activated.

Spectral analysis

When both sensors detect motion, but the correlational analysis does not identify enough similarities, LISA compares the frequency components in the signals from both sensors.

Multi-level anti-sabotage protection

MotionCam Outdoor cannot be unnoticed off, even if the system is disarmed. The detector is equipped with masking sensors that react to obstructing, covering and painting the lens.

It will take less than a minute for the hub to detect the loss of communication with the detector and inform a monitoring center and users of the problem. If the MotionCam Outdoor is disassembled, you will quickly become aware of it.

Effective security in any weather

MotionCam Outdoor resists heat up to +60°С and resists cold down to -25°С. And to protect the anti-masking system sensors from rain and snow, we've included a special hood.

Uncompromising communication reliability

MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweler transmits alarms in 0.15 seconds and thanks to Wings the first notification will be in the app in less than 9 seconds.

The radio signal range is sufficient to install the detector where it will be most effective.

Less manual work. More in-app settings.

The MotionCam Outdoor connection and setup process saves installers time in the best possible way. To add a detector to the system, simply scan the QR code with the Ajax app, assign it a name and room. Configure the device on the app in real time, test detection and communication zones. If necessary, the detector can be disabled or system parameters reconfigured remotely, with no site visit required.

Technical specifications

Detector Type: Wireless

Installation method: Outdoor/indoor

Recommended installation height: 0.8 – 1.3 meters

Compatibility: Hub 2, Hub 2 Plus (Does not work with ReX radio signal repeater)

Sensor element : 2 × PIR sensors

Motion detection distance : Adjustable, between 3 and 15 meters

Pet Immunity : Pets up to 80 cm tall

Sensitivity: Adjustable, 3 levels

Motion detector viewing angle: Horizontal — 88.5° / Vertical — 80°

Camera angle: Horizontal — 105° / Vertical — 102°

Infrared light for shooting in the dark: Available

Power supply : 4 × CR123A batteries

Supply Voltage: 3V

Battery Life: Up to 3 years (up to 2.5 years if “Input Delay” setting is enabled)

Alarm transmission time : 0.15 seconds

Protection index : IP55

Anti-tampering: Anti-masking, tamper protection, jam detection and tamper resistant:

Remote configuration and testing: Available

ARC Compatibility: ARC Connectivity: Contact ID, SIA (DC-09) - CRA software compatible with visual alarm verification

Dimensions: 206 × 108 × 93 mm

Weight: 0.47 Kg